PRODUCTS
- Distribution Transformer
- Resin Casting Dry Type Power Transformer
- Whole-sealed Type Distribution Power Transformer
- Electrical Power Fitting
- Power Transmission and Distribution Fittings
- Power Line Fittings
- Power Line Helical Fittings
- High Voltage Outdoor Electrical Equipment
- Copper and Aluminum Contact Arms
- Lightening Protection Grounding Clamps
- Electric Wire & Cable and Accessories
- Rubber Sheathed Cable for General Purposes
- Rubber Insulated Cables Used in Open Countr
- Flame-retardant Rubber Sheathed Cables for Mining Purposes
- PVC Insulated Cable for House Wiring
- XLPE Insulated Power Cable
- PVC Insulated Power Cable
- Low-smoke Halogen-free Flame-retardant and Fire-resistant Cables
- Control Cables
- Overhead Conductors and Cables
- Aluminum wire and ACSR
- Special Cables
- Elevator Cable
HOTLINE
0577-57157777
Rubber Insulated Cables Used in Open Countr
Rubber Insulated Screened Cable Used in Open Country
- Share:
1. Standard
Q/YL12-2008
This product is used for AC rated voltage of 250V and below in open country.
3. Guide to Use
5. Specification
1) A 50HZ AC voltage test of 1000V shall be applied between the cores of finished cable and the cable screen for 5 minutes, and no breakdown shall occur.
2) The conductor DC resistance at 20℃ shall be no more than 19.1Ω/km.
3) The insulation resistance between the core of finshed cable and cable screen at 20℃ shall be no less than 25MΩ·kM.
The ambient temperature is between -45 ~ +50℃, and the max. conductor temperature in normal use is 65℃.
| Code |
No. of Cores * Sectional Area (mm2) |
Conductor Strands/Dia. (mm) |
Overall Dia. (mm) |
Approx. Weight (kg/km) |
| WYHDP | 4*1 | 19/0.26 | 14.5 | 314 |
| 5*1 | 19/0.26 | 16.7 | 400 | |
| 7*1 | 19/0.26 | 17.9 | 484 | |
| 8*1 | 19/0.26 | 19.1 | 538 | |
| 10*1 | 19/0.26 | 22.0 | 660 | |
| 12*1 | 19/0.26 | 22.6 | 739 | |
| 14*1 | 19/0.26 | 23.7 | 815 | |
| 16*1 | 19/0.26 | 24.9 | 904 | |
| 19*1 | 19/0.26 | 27.1 | 1080 | |
| 24*1 | 19/0.26 | 31.2 | 1330 | |
| 27*1 | 19/0.26 | 31.8 | 1440 | |
| 30*1 | 19/0.26 | 32.9 | 1520 | |
| 33*1 | 19/0.26 | 34.1 | 1690 | |
| 37*1 | 19/0.26 | 35.3 | 1840 | |
| 44*1 | 19/0.26 | 39.4 | 2150 | |
| 48*1 | 19/0.26 | 40.0 | 2290 |
5. Specification
1) A 50HZ AC voltage test of 1000V shall be applied between the cores of finished cable and the cable screen for 5 minutes, and no breakdown shall occur.
2) The conductor DC resistance at 20℃ shall be no more than 19.1Ω/km.
3) The insulation resistance between the core of finshed cable and cable screen at 20℃ shall be no less than 25MΩ·kM.
